Cryosauna "Space Cabin" TM

During past 15 years we have developed and produced more than 10 cryosauna ”SPACE CABIN” models. The differences were in design, construction, electronics, operating joints, raw materials. First models had operation panel on the right side of the unit and it was located too high for operator so we used to produce special steps for this purpose. This was increasing dimensions of the unit and it was pretty complicated to operate the machine. Due to these reasons we have moved operation joints inside the unit and installed operator panel on the left side at comfortable height for operator (see Standard model). This decision solved issues with operator work and helped us to decrease cryosauna dimensions and make the machine look better. Now we are using touchscreen control panel with intuitive interface which makes the work with our equipment as simple as possible for the operator. We pay special attention to the quality of exterior materials that we are using during manufacturing process. As you can see on the photos we were using composite, stainless steel, bamboo, special plywood etc. Currently we are using shockproof panels (HIPS) which are very safe and easy in use. In recent models we are using upgraded lift mechanism which is much stable and stronger. Recent lift motors helped us not only solve the issue with lift platform stability but increase the speed of lift platform work and increase bearing capacity. We have upgraded gas preparation device to decrease liquid nitrogen consumption and currently our units have lowest liquid nitrogen consumption on the market. We have upgraded joints which are located inside the patient cabin to provide steady cold treatment for the human body. The cabin design was changed as well. Our units had different options like: remote control, colored led lights, speakers at the top and many others but we focusing on the quality of cryotherapy session which must be a common thing for all cryosaunas.